Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!pprg.unm.edu!hc!lll-winken!uunet!mcvax!kth!draken!tut!kaarne!mk59200
From: mk59200@kaarne.tut.fi (Kolkka Markku Olavi)
Newsgroups: comp.sys.amiga
Subject: Re: Dnet2.0
Keywords: solved
Message-ID: <7017@etana.tut.fi>
Date: 9 May 89 16:32:16 GMT
References: <8905070127.AA13702@postgres.Berkeley.EDU> <120@ra.abo.fi> <DEVEN.89May8023338@daniel.pawl.rpi.edu>
Sender: News@tut.fi
Reply-To: mk59200@kaarne.UUCP (Kolkka Markku Olavi)
Organization: Tampere University of Technology, Finland
Lines: 24

Thanks to Leonard Norrgard, Matt Dillon and others who helped, I have
now Dnet running.  As a summary, here's how to use Dnet through a
Bridge TCP/IP terminal server:

1. On Amiga side: start Dnet with command
	dnet -8 -X -h0

2. Connect and login to Unix system

3. Set Unix terminal options to 8 bit, no parity checking
	stty -parity -istrip

4. Set terminal server's options
	hit left-Amiga-B (send break)
	set xmitbinary=on fct=none fcf=none
	resume

5. start Unix side of Dnet

Now, FTERM should start normally. Easy, isn't it? :-)

--
	Markku Kolkka
	mk59200@tut.fi