Xref: utzoo comp.sys.amiga:33053 comp.sys.amiga.tech:4885
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!munnari!elecvax!spinifex!rodneyc
From: rodneyc@spinifex.eecs.unsw.oz (Rodney Campbell)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: HEEEEEEELLLLLLLLPPPP!!!
Summary: try installing the arp.library
Keywords: help me I can't access my GVP hard drive
Message-ID: <350@spinifex.eecs.unsw.oz>
Date: 1 May 89 10:23:47 GMT
References: <2044@wpi.wpi.edu>
Organization: EE & CS, Uni N.S.W., Sydney, Australia
Lines: 22

In article <2044@wpi.wpi.edu>, jdutka@wpi.wpi.edu (John Dutka) writes:
> I've just installed ARP V1.3 with the ArpInstall program, but I didn't 
> install the arp.library or the other file.  Now, when I boot up my GVP 
> with my boot disk, all I get is an error code telling me that I need 
> arp.library v39...

Try installing the arp.library from the libs directory of your arp install
disk onto the disk you have installed arp onto (put it in the libs
directory of this disk also). This should fix the message saying it needs
arp.library v39...
The other file you left out installing is probably the arp shell.
This is quite a nice shell and you may like to use it...
Read the docs that come with arp 1.3

==============================================================================
      ___     Rodney Campbell :: University of New South Wales
     /    /
    /   /          / ACSnet,CSNET: rodneyc@spectrum.eecs.unsw.oz
   /__/   ___  ___/          UUCP: {uunet,mcvax}!spectrum.eecs.unsw.oz!rodneyc
  /   |  /  / /  /          Snail: 34 Harbourne Road, Kingsford, 2032.
 /    |_/__/_/__/                  N.S.W. Australia.   PH +61 02 663 3917
=============================================================================