Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!amdahl!pccuts!acs
From: acs@pccuts.pcc.amdahl.com (Tony Sumrall)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Determining Window Border Widths
Message-ID: <788@pccuts.pcc.amdahl.com>
Date: 2 May 89 04:00:43 GMT
References: <8904291926.AA19974@hermes.berkeley.edu> <6678@medusa.cs.purdue.edu>
Reply-To: acs@pccuts.pcc.amdahl.com (Tony Sumrall)
Organization: Amdahl Corporation, Sunnyvale CA
Lines: 13

In article <6678@medusa.cs.purdue.edu> wolff@cs.purdue.EDU (Robert M. Wolff) writes:
>I assume you want dOvo know the maximum width/height of the 'preferences'
>screen? Well, in vt100v2.x they do it a nice little way...
 
"They" is ME.  I do VT100.  What I was talking about was a means of finding
the size of the BORDERS.
  
> bob
-- 
Tony Sumrall acs@pccuts.pcc.amdahl.com <=> amdahl!pccuts!acs

[ Opinions expressed herein are the author's and should not be construed
  to reflect the views of Amdahl Corp. ]