Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ukma!rutgers!ucsd!helios.ee.lbl.gov!nosc!manta!dwi
From: dwi@manta.NOSC.MIL (Steve Stamper)
Newsgroups: comp.sys.amiga.tech
Subject: Re: New 6.0 2500 Hates 68000 Mode!
Message-ID: <792@manta.NOSC.MIL>
Date: 5 May 89 22:52:34 GMT
References: <576@dialog.UUCP> <6782@cbmvax.UUCP>
Reply-To: dwi@manta.nosc.mil.UUCP (Steve Stamper)
Organization: Naval Ocean Systems Center, San Diego
Lines: 14

The problem with my rev 6 board was it did not like the RAM on the
8-UP! card I had in there.  All of the rev 4.X machines liked the 8-up!
card though.  The good news is I sold the 8-UP! for $400.00 and bought
myself 2M of the 424256V-10 chips for my a2620 for $256.00.  So i
now have 4M of 32 bit ram and a profit!  

BTW
Is there any performance increase in going to 80ns DRAMS on the A2620.
I mean I would not go through the trouble to remove the 100ns RAM
on the Card now, but if one did what kind of performance boost
would one get.  I myself am going to have enough trouble arc welding
in the 100ns DRAMS I just got!

-Roger