Path: utzoo!attcan!uunet!husc6!rutgers!tut.cis.ohio-state.edu!ucbvax!UCONNVM.BITNET!SEWALL From: SEWALL@UCONNVM.BITNET (Murph Sewall) Newsgroups: comp.sys.apple Subject: Re: Bugs in Apple CP/M Kermit Message-ID: <8905051044.aa24612@SMOKE.BRL.MIL> Date: 5 May 89 14:27:54 GMT References: Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 22 > I'm trying to download some CP/M software from a VM system to an >enhanced Apple 2E with CP/M Kermit. It works OK at 300 baud, however, >at 1200 baud, the first 4 or 5 characters of each line are lost. Also, >the version I have only supports VT52 emulation. > Does anyone have a version of Apple CP/M Kermit that does not lose >characters at 1200 baud, and also supports VT100 emulation? I could use >the regular Apple Kermit but I don't have a tool to convert files from >Prodos to CP/M. The EZ solution is to use Kermit-65 version 3.85 under ProDOS AND (tah, tah) get the Chameleon from APPLE2-L (the tool to convert files from EITHER ProDOS or DOS 3.3 to CP/M ). You'll get VT100 and successful transfers at speeds up to 19,200 bps. Murph Sewall Vaporware? ---> [Gary Larson returns 1/1/90] Prof. of Marketing Sewall@UConnVM.BITNET Business School sewall%uconnvm.bitnet@mitvma.mit.edu [INTERNET] U of Connecticut {psuvax1 or mcvax }!UCONNVM.BITNET!SEWALL [UUCP] (203) 486-5246 [FAX] (203) 486-2489 [PHONE] 41 49N 72 15W [ICBM] -+- I don't speak for my employer, though I frequently wish that I could (subject to change without notice; void where prohibited)