Path: utzoo!yunexus!stpl!tyler
From: tyler@stpl.UUCP (Tyler IVANCO)
Newsgroups: comp.sys.atari.st
Subject: Re: LaTeX from Accusoft (really drivers for the SLM)
Keywords: TeX, DVI, SLM804
Message-ID: <184@stpl.UUCP>
Date: 30 Apr 89 16:30:46 GMT
Article-I.D.: stpl.184
References: <8904241438.AA18467@ucbvax.Berkeley.EDU>
Reply-To: tyler@stpl.UUCP (Tyler IVANCO)
Organization: ISTS/Solar Terrestrial Physics Lab
Lines: 23


	We've written a driver for the ATARI Laser printer and
for the screen as well.  This week we will be sending both over to
the moderator.  The distribution will include:

1) The Atari ST previewer 3a.3 (windowed)
2) The Atari SLM driver   3.1 for PUN 2.  (About 3-4 ppm)

	Unfortunately we've not gotten around to setting the driver up
for a unit number search.  As a result, the driver will only work for 
those laser printers with device id set to 2.  One day this will be 
fixed.  

	Source will not be included in this distribution.  Perhaps later.
For those REALLY interested we may be willing to transmit it over to you.
However, at this time, we are not set up to do this.

	For others, we also plan to release our dvihp driver for the
HP LaserJet (Plus and II) under TOS as soon as our port is complete.  
Under Atari OS/9 it is able to print at 8 ppm after the fonts have been
loaded.  

						Tyler Ivanco