Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!AECLCR.BITNET!01659
From: 01659@AECLCR.BITNET (Greg Csullog)
Newsgroups: comp.sys.atari.st
Subject: LDW Metafile problem
Message-ID: <8905061946.AA13963@ucbvax.Berkeley.EDU>
Date: 6 May 89 19:45:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 77

In a reply to my first request about info re: the metafile save problem,
a NETter asked me to make sure GDOS was in. Thanks for the tip but that was
not the problem. I had GDOS in (actually G+Plus) and could run my Timeworks
DTP. When I tried a /GraphSaveMetafile a file called GEMFILE.GEM (236 bytes)
was created, followed by the message 'Cannot open workstation'. Damn, I want
to touch up metafiles with something like EASYDRAW or GEMDRAW (PC). The
following shows my ASSIGN.SYS file:

path = d:\publish\gemsys
01p screen.sys ; DEFAULT
02p acreen.sys ; low res
03p screen.sys ; MEDIUM RESOLUTION
04p screen.sys ; HIGH RESOLUTION
shss03as.fnt
shss05as.fnt
shss06as.fnt
shss07as.fnt
shss10as.fnt
shss12as.fnt
shss14as.fnt
shss18as.fnt
shss24as.fnt
shss36as.fnt
shtr07as.fnt
shtr10as.fnt
shtr14as.fnt
shtr18as.fnt
shtr36as.fnt
shrk10as.fnt
shrk18as.fnt
shrk36as.fnt
shra09as.fnt
shra18as.fnt
shra36as.fnt
shdl10c.fnt
shdl18c.fnt
shdl36c.fnt
shma09as.fnt
shma18as.fnt
shma36as.fnt
shdb07.fnt
shdb10.fnt
shdb14.fnt
shdb18.fnt
shdb36.fnt
21 printer.sys  <<-- See, printer IS 21
;Printer is 24-pin Epson (LQ800)
lqss08as.fnt
lqss10as.fnt
lqss12as.fnt
lqss14as.fnt
lqss20as.fnt
lqss24as.fnt
lqss30as.fnt
lqtr08as.fnt
lqtr10as.fnt
lqtr12as.fnt
lqtr14as.fnt
lqtr20as.fnt
lqtr24as.fnt
lqtr30as.fnt
lqrk18as.fnt
lqrk30as.fnt
lqra15as.fnt
lqra30as.fnt
lqdl18c.fnt
lqdl30c.fnt
lqma20as.fnt
lqma30as.fnt
lqdb08.fnt
lqdb12.fnt
lqdb18.fnt
lqdb24.fnt
lqdb30.fnt
31 meta.sys  <<-- See, metafile IS 31

What's the problem here! Has anyone actually saved metafiles with LDW?