Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!usc!randvax!leverich
From: leverich@randvax.UUCP (Brian Leverich)
Newsgroups: comp.sys.ibm.pc
Subject: NEED EMS DRIVER SOFTWARE
Summary: Need EMS driver for a Suntac AT motherboard
Message-ID: <1987@randvax.UUCP>
Date: 30 Apr 89 01:13:21 GMT
Reply-To: leverich@rand-unix.UUCP (Brian Leverich)
Organization: RAND Corp., Santa Monica, CA
Lines: 23


I bought a Suntac AT motherboard a while back and for the heck of it I just
read the manual.  Turns out that the Suntac chipset includes a MMU so the
above 640k memory can be used as either extended or _expanded_ memory.

The catch is there should have been EMS driver software bundled with the
board, and there wasn't.  The dealer has dematerialized, I don't have an
address for Suntac, and I can't use the hardware capabilities without the
software.

Does anyone have a Suntac-62 Chip Set EMS Driver Rev. 1.00 that I could
ftp or, better still, arrange to have sent out on a disk.  (I'm of course
willing to pay box and postage, etc.)

Alternatively, does anyone have a PD or shareware driver that would work
with my MB?

E-mail's the best way to reply.  Thanks much!  -B
-- 
  "Simulate it in ROSS"
  Brian Leverich                       | U.S. Snail: 1700 Main St.
  ARPAnet:     leverich@rand-unix      |             Santa Monica, CA 90406
  UUCP/usenet: decvax!randvax!leverich | Ma Bell:    (213) 393-0411 X7769