Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!mcvax!kth!draken!chalmers!ce.chalmers.se!umf
From: umf@ce.chalmers.se (Martin Forsberg ENDdec89BB)
Newsgroups: comp.sys.ibm.pc
Subject: Re: PROCOMM PLUS problem
Keywords: PCPLUS
Message-ID: <229@cthce.ce.chalmers.se>
Date: 30 Apr 89 16:04:58 GMT
References: <12324@hodge.UUCP>
Reply-To: umf@cthce.UUCP (Martin Forsberg ENDdec89BB)
Organization: Dept. of Comp. Eng., Chalmers, Goeteborg, Sweden
Lines: 27

In article <12324@hodge.UUCP> jdm@hodge.UUCP (jdm) writes:
>
>The communications program Procomm Plus V1.1B has a feature that
>is mapped to the back quote (`) key.  It's a pop-up menu that allows
>you to do things while on line, ect.  This is fine, but occasionally
>I need to transmit a back quote character.  How do I disable/re-map
>the back quote function so I can transmit the back quote character.
>It has nothing to do with the translation table; it only translates
>received characters, not transmitted ones.
>

Have you got the manual? if you have, this is no problem, but I assume
that you haven't got the manual. What you should do is to press ALT & S,
then you will come to the setup menu, then move to the 'general options'
choice and press ENTER. Now you are in the general options menu and by
pressing the letter K you will be able to change the back quote to any
character that you wish. Hope this helps. (Buying the program to get the
manual isn't such a bad idea).



+----------------------------------------------------------------------------+
|	Martin Forsberg			d4umf@dtek.chalmers.se		     |
|	PL 9003 Bueras				  or			     |
|	43900 Onsala			umf@cd.chalmers.se		     |
|	  SWEDEN							     |
+----------------------------------------------------------------------------+