Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ulowell!m2c!wpi!jwhitson
From: jwhitson@wpi.wpi.edu (John C Whitson)
Newsgroups: comp.sys.ibm.pc
Subject: Western Digital
Keywords: DISK CONTROLLER
Message-ID: <2147@wpi.wpi.edu>
Date: 1 May 89 22:38:33 GMT
Organization: Worcester Polytechnic Institute, Worcester, Mass.
Lines: 13

Does anyone know how to configure a Western Digital Hard/Floppy Disk
Controller Card # WD1002-WA2 (year 1984 for an AT; 16 bit) for a
Seagate ST-251-0 (40ms 42.8MB) hard disk? In particular, jumper positions
are needed. I know how to set the software. If necessary, the BIOS is
Award Version 3.01B.  Thanks in advance....

---------------------------------------------------------------------------
John Whitson:	Internet: jwhitson@wpi.wpi.edu	Bitnet: jwhitson@wpi.bitnet

-- 

---------------------------------------------------------------------------
John Whitson:	Internet: jwhitson@wpi.wpi.edu	Bitnet: jwhitson@wpi.bitnet