Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!purdue!decwrl!shelby!labrea!rutgers!rochester!pt.cs.cmu.edu!b.gp.cs.cmu.edu!ralf
From: ralf@b.gp.cs.cmu.edu (Ralf Brown)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Need help with Epson printer command
Keywords: nine pin graphics
Message-ID: <4901@pt.cs.cmu.edu>
Date: 4 May 89 16:28:03 GMT
References: <7967@killer.Dallas.TX.US> <1293@optilink.UUCP> <5061@tekgvs.LABS.TEK.COM>
Distribution: na
Organization: Carnegie-Mellon University, CS/RI
Lines: 16

In article <5061@tekgvs.LABS.TEK.COM> toma@tekgvs.LABS.TEK.COM (Tom Almy) writes:
}In article <1293@optilink.UUCP> cramer@optilink.UUCP (Clayton Cramer) writes:
}>In article <7967@killer.Dallas.TX.US>, bobc@killer.Dallas.TX.US (Bob Calbridge) writes:
}>Nope.  You can't get to the ninth pin.  You can only use 8 pins in graphics
}>mode.  The ninth pin is for underlining.  [...]
}
}I have an FX-85, 86e, and FX-1050 and they support 9 pin printing.  Perhaps
}older versions (FX-80 and MX-80) didn't.  I have never tried it though.  

9-pin graphics work just fine on my FX-80.  I'm pretty sure the MX-80 only
has 8-pin graphics.
-- 
{harvard,uunet,ucbvax}!b.gp.cs.cmu.edu!ralf -=-=- AT&T: (412)268-3053 (school) 
ARPA: RALF@B.GP.CS.CMU.EDU |"Tolerance means excusing the mistakes others make.
FIDO: Ralf Brown at 129/31 | Tact means not noticing them." --Arthur Schnitzler
BITnet: RALF%B.GP.CS.CMU.EDU@CMUCCVMA -=-=- DISCLAIMER? I claimed something?
--