Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!indri!nic.MR.NET!hal!ncoast!allbery From: allbery@ncoast.ORG (Brandon S. Allbery) Newsgroups: comp.sys.ibm.pc Subject: Re: PROCOMM PLUS problem Message-ID: <13618@ncoast.ORG> Date: 5 May 89 23:55:20 GMT References: <12324@hodge.UUCP> Reply-To: allbery@ncoast.UUCP (Brandon S. Allbery) Followup-To: comp.sys.ibm.pc Organization: Cleveland Public Access UN*X, Cleveland, Oh Lines: 22 As quoted from <12324@hodge.UUCP> by jdm@hodge.UUCP (jdm): +--------------- | The communications program Procomm Plus V1.1B has a feature that | is mapped to the back quote (`) key. It's a pop-up menu that allows | you to do things while on line, ect. This is fine, but occasionally | I need to transmit a back quote character. How do I disable/re-map | the back quote function so I can transmit the back quote character. +--------------- Have you never looked at the Setup menus? General menu, item "J" -- "Menu line" -- turn it off. You can also change item "K", "Menu line key", to change the character. Unfortunately, you *must* use a printable ASCII character; as a result, I don't use the menu line. I often need to be able to type *all* the printable characters. ++Brandon -- Brandon S. Allbery, moderator of comp.sources.misc allbery@ncoast.org uunet!hal.cwru.edu!ncoast!allbery ncoast!allbery@hal.cwru.edu Send comp.sources.misc submissions to comp-sources-misc@ NCoast Public Access UN*X - (216) 781-6201, 300/1200/2400 baud, login: makeuser