Xref: utzoo comp.sources.wanted:7292 comp.sys.ibm.pc:28402 comp.sys.intel:800
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uflorida!ukma!rutgers!att!homxb!homxc!marv
From: marv@homxc.ATT.COM (M.LISS)
Newsgroups: comp.sources.wanted,comp.sys.ibm.pc,comp.sys.intel
Subject: 8087 Installation Help Would Be Appreciated
Keywords: 8087, HELP!
Message-ID: <6559@homxc.ATT.COM>
Date: 6 May 89 19:23:30 GMT
Organization: THE LABS
Lines: 19



I am having trouble installing an 8087-2 Math Co-Processor
in my AT&T PC-6300.  I installed it in the only available
like-sized socket on the motherboard and set Switch 5 to Off
(0) on DIPSWITCH-0.  But after doing so however, strange
things happen.  Depending on whether I have the switch set
to "0" or "1", boot from the HD or a Floppy, I get error
messages like "Replace Disk and strike any key to continue",
i8087 Fails, or booting stops dead in its' tracks.  When I
remove the 8087, everything's fine.

Should I be doing something else, like add a line to my
CONFIG.SYS?  I'd appreciate e-mailed (constructive)
responses to this, my current dilemna.

Thanks,

Marv