Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!dogie.macc.wisc.edu!indri!aplcen!wb3ffv!fallst!tkevans
From: tkevans@fallst.UUCP (Tim Evans)
Newsgroups: comp.unix.xenix
Subject: Re: uugetty for SCO XENIX-286 2.2.1
Summary: You Have All You Need Already
Keywords: uugetty, one modem
Message-ID: <544@fallst.UUCP>
Date: 29 Apr 89 12:29:27 GMT
References: <17170@mimsy.UUCP>
Organization: Tim Evans, Fallston, MD
Lines: 16

In article <17170@mimsy.UUCP>, meyer@mimsy.UUCP (John R. Meyer) writes:
> 
> 	I am interested in getting uucp and getty working on the same
> modem, with each checking to make sure there is no conflict with the
> other.

You can configure Xenix to enable a port for both incoming and outgoing
calls (UUCP or otherwise) without 'uugetty.'  See the UUCP setup section
of your manuals (User Guide?) under the heading "using the same line for
call in and call out" (or similar wording).

-- 
UUCP:  ...!{rutgers|ames|uunet}!mimsy!aplcen!wb3ffv!fallst!tkevans
INTERNET:  tkevans%fallst@wb3ffv.ampr.org
OTHER: ...!attmail!fallst!tkevans
Tim Evans  2201 Brookhaven Court, Fallston, MD  21047   (301) 965-3286