Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!mcvax!cernvax!acadch!impch!patg
From: patg@impch.UUCP (Patrick Guelat)
Newsgroups: comp.unix.xenix
Subject: Re: Help! My fsck is broke
Message-ID: <897@impch.UUCP>
Date: 5 May 89 10:14:15 GMT
References: <1078@cs.rit.edu>
Reply-To: patg@impch.UUCP (Patrick Guelat)
Organization: ImproWare ComputerSystems Switzerland
Lines: 26

In article <1078@cs.rit.edu> exg9537%ucss@cs.rit.edu () writes:
+--------------
| At work we are switching over to an intel 386 running SCO 2.3.1.
| [....]
| When using fsck on the root system it starts out fine:        
| /dev/root:
| 
| ** Phase 1 - Checking Blocks and ...
| 
| but after about a minute the prompt comes back.  No error messages, and
| never entered Phase 2.  I have tried most every fsck option.  No help.
+----------------
OOOPS ! We had the same problem a few weeks ago ! I've tried fsck about
one hundred times and I never saw more than Phase 1 !! It seems, that
it breaks down, must be a really nasty bug. Our solution was to take
an old fsck from a Xenix 2.2.1 286 system and that one worked...
After that, 'fsck -s' with the new fsck didn't break anymore...

	Patrick
--
\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//
// Patrick Guelat, ImproWare Switzerland    \    SMART: patg@impch.uucp   \\
\\ SUB-NET: ..!altger!impch!{patg,boxdiger}  \________ Wasting time is an //
// EUNET  : ..!cernvax!impch!{patg,boxdiger}          \  important time of\\
\\ OTHER  : ..!uunet!acad!acadch!impch!{patg,boxdiger} \   living.        //
//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\//\\