Xref: utzoo comp.unix.xenix:5978 comp.dcom.modems:3818
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!bpa!cbmvax!vu-vlsi!dsinc!wells!edw
From: edw@wells.UUCP (Ed Wells)
Newsgroups: comp.unix.xenix,comp.unix.i386,comp.dcom.modems
Subject: uucico for TB+ modem
Keywords: 19200 baud
Message-ID: <48@wells.UUCP>
Date: 14 May 89 19:46:43 GMT
Distribution: na
Organization: Wells Computer Systems Corp., Levittown, Pa. 19058
Lines: 22

RE: SCO Xenix, Rev. 2.2.x Telebit modem problem at 19,200 baud.

  I have a Telebit 19200 baud modem that has been online for close
to a year now.  I'm very pleased with the modem except that I can't
get it running faster that 9600 baud on a dialout.  It appears that
SCO can't support 19200 baud.  I was told that they had a Telebit
patch, but after ordering it, I found that it supported the extra
Telebit commands, but not anything faster than 9600 baud.

  Has anyone else found a fix to get to 19200?  The fix would have
to be for the "/usr/lib/uucp/uucico" program.

  BTW: The port work fine for 19200 baud dial-ins, just not dial-outs.
For this reason, I just locked the modem at 9600 baud all of the time.
I know that SCO supposably has it working properly on HDB, however, I'm
not ready to upgrade past 2.2.x until the full version 3.x.x comes out.

-- 
=========================================================================
Edward E. Wells Jr., President			    Voice: (215)-943-6061
Wells Computer Systems Corp., Box 343, Levittown, Pa. 19058
{dsinc,francis,hotps,lgnp1,mdi386,pebco}!wells!edw