Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!att!mcdchg!mcdhup!greggy
From: greggy@mcdhup.UUCP (Gregg Yedwab)
Newsgroups: comp.dcom.modems
Subject: Re: uucico for TB+ modem
Summary: Register problems for Telebit 19200 outgoing
Keywords: 19200 baud
Message-ID: <142@mcdhup.UUCP>
Date: 16 May 89 16:57:11 GMT
References: <48@wells.UUCP>
Distribution: na
Organization: Motorola Microcomputer Division, Hauppauge, NY
Lines: 18

In article <48@wells.UUCP>, edw@wells.UUCP (Ed Wells) writes:
>   I have a Telebit 19200 baud modem that has been online for close
> to a year now.  I'm very pleased with the modem except that I can't
> get it running faster that 9600 baud on a dialout.  It appears that
> SCO can't support 19200 baud.  I was told that they had a Telebit
> patch, but after ordering it, I found that it supported the extra
> Telebit commands, but not anything faster than 9600 baud.

Try this for dialing out:

tbfast	=W-,	"" AT "" AT OK ATS92=0S50=255DT\T "" \d\d\d\d\d\d\d\d CONNECT\sFAST

The register combination of s92 followed by s50 should solve problem.
-- 
Gregg Yedwab @ Motorola Microcomputer Division, Hauppauge, N.Y. 11788
UUCP: {rutgers, mcdchg, hplabs!motsj1} mcdhup!greggy
Voice: 516-361-7000
I represent merely myself!