Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!sun-barr!cs.utexas.edu!uunet!tektronix!percival!omen!caf
From: caf@omen.UUCP (Chuck Forsberg WA7KGX)
Newsgroups: comp.dcom.modems
Subject: Re: xyzmodem problems
Message-ID: <765@omen.UUCP>
Date: 17 May 89 09:10:02 GMT
References: <24404@agate.BERKELEY.EDU> <1399@bucket.UUCP>
Reply-To: caf@omen.UUCP (Chuck Forsberg WA7KGX)
Distribution: usa
Organization: Omen Technology Inc, Portland Oregon
Lines: 11

In article <1399@bucket.UUCP> leonard@bucket.UUCP (Leonard Erickson) writes:
:To run [x|y|z]modem you must be using hardware flow control throughout.
:Software flow control will kill the xfer.

Close, but no cigar. ZMODEM protects the four flow control characters.

Chuck Forsberg WA7KGX          ...!tektronix!reed!omen!caf 
Author of YMODEM, ZMODEM, Professional-YAM, ZCOMM, and DSZ
  Omen Technology Inc    "The High Reliability Software"
17505-V NW Sauvie IS RD   Portland OR 97231   503-621-3406
TeleGodzilla:621-3746 FAX:621-3735 CIS:70007,2304 Genie:CAF