Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!sun-barr!cs.utexas.edu!uunet!mcvax!unido!tub!net
From: net@tub.UUCP (Oliver Laumann)
Newsgroups: comp.soft-sys.andrew
Subject: Re: (none)
Message-ID: <846@tub.UUCP>
Date: 17 May 89 10:30:41 GMT
References: <8905160659.AA05647@uunet.UU.NET>
Reply-To: net@tub.UUCP (Oliver Laumann)
Distribution: inet
Organization: Technical University of Berlin, Germany
Lines: 22

In article <8905160659.AA05647@uunet.UU.NET> grahamd@otc.oz.AU (Graham Dumpleton) writes:
> 
> I am trying to install Andrew on top of X11R3 on a Sun3/50 running SunOS 4.01
> and am having the following problem.
> 
> I have managed to compile X11 using the shared libraries of SunOS 4, however
> this presents a problem when installing Andrew. This is that when an
> attempt is made at creating xws.do; in atk/basics, makedo complains about lots
> of Undefined symbols, namely everything which would appear in the X11 library.

I have seen others reporting similar problems, too.  I don't quite
understand this; I successfully installed Andrew on a Sun running
SunOS 4.0.1 (with X11R3) a couple of days ago.  I only had to apply
minor modifications to a few files (e.g. certain #include's had to
be changed for SunOS 4.0).  The dynamic loading stuff worked fine
without any changes.

Did you follow the installation instructions in doc/rel/install?

Regards,
--
Oliver Laumann              net@TUB.BITNET              net@tub.UUCP