Path: utzoo!attcan!uunet!cs.utexas.edu!sun-barr!apple!oliveb!amiga!cbmvax!andy From: andy@cbmvax.UUCP (Andy Finkel) Newsgroups: comp.sys.amiga Subject: Re: More disk woes - Help! (Long) Message-ID: <6827@cbmvax.UUCP> Date: 11 May 89 16:10:51 GMT References: <21672@srcsip.UUCP> <6814@cbmvax.UUCP> <21690@srcsip.UUCP> Reply-To: andy@cbmvax.UUCP (Andy Finkel) Organization: Commodore Technology, West Chester, PA Lines: 71 In article <21690@srcsip.UUCP> carpent@coltrane.SRC.Honeywell.COM (Todd Carpenter) writes: > >Thanks for your reply! I still can't get it to work... > > >In article <6814@cbmvax.UUCP> andy@cbmvax.UUCP (Andy Finkel) writes: > >(first part, where I prep disk, reboot, and get NOT A DOS DISK) > > > (so I turn it off, reboot again, once running, turn it back on, let it spin > > up for some time.) > > > >> mount res0: > >> format drive res0: name "BH0" > >| NO NO NO >| THIS ERASES THE INFORMATION STORED ON THE FIRST TWO RESERVED CYLINDERS!!! >| >| instead just | >| >| format drive dh0: name FunnyPart >| >| >| Don't remount res0: >| Don't ever format res0: >| >| The manual has a few words on this as well. > >But, but, but: page 25, item (2) says to always mount before prepping. >But (the main thingie), um (blush), yes, I should be formatting dh0: I feel so >foolish. It still doesn't work: Ok, lets try again. RES0: is for PREPing the first ST506 drive RES2: is for PREPing the first SCSI drive. The sequence is mount res0: prep res0: (answer the questions properly; if you enter incorrect information the drive may not be found) REBOOT THE MACHINE Now, drive dh0: should be automounted. do an assign and an info and see what drives you see in the lists. you should see a DH0: Now format dh0: That's pretty much it. -- andy finkel {uunet|rutgers|amiga}!cbmvax!andy Commodore-Amiga, Inc. "There is no programming problem that cannot be solved by proper "application of the Delete command." Any expressed opinions are mine; but feel free to share. I disclaim all responsibilities, all shapes, all sizes, all colors.