Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!deimos.cis.ksu.edu!uxc!uxc.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!rjm10838
From: rjm10838@uxa.cso.uiuc.edu
Newsgroups: comp.sys.amiga
Subject: A1000 Powerup problem
Message-ID: <111400041@uxa.cso.uiuc.edu>
Date: 10 May 89 07:55:00 GMT
Lines: 24
Nf-ID: #N:uxa.cso.uiuc.edu:111400041:000:1045
Nf-From: uxa.cso.uiuc.edu!rjm10838    May 10 02:55:00 1989


Here's a little problem I've been having lately with my 1000:

I turn on the machine, pop in the Kickstart, and things go as expected.
Once Kickstart is done loading, either one of two things happens:

     1). The Workbench disk picture comes up and everything works fine.

     2). The machine bombs, GURU #(lots of zeroes)4. After CTRL-A-A'ing
         it anywhere from 1 to fifteen times, the Workbench screen comes
	 up, and everything else works just fine.

What could it be? I have an A1000 with the Amazing Computing 512k upgrade
and a Wedge hard drive controller attached. I've had the memory for a
year and a half, and I've experienced no problems up until now. By the
way, a memory testing program says all of my memory is fine. Also, I
took out my hard drive controller, and the problem still happens.

Any help will be extremely appreciated.

--------------------------------------------------------------------------
Ron Menelli
rjm10838@uxa.cso.uiuc.edu
--------------------------------------------------------------------------