Path: utzoo!attcan!uunet!cbmvax!jss From: jss@cbmvax.UUCP (John Schilling QA) Newsgroups: comp.sys.amiga Subject: Re: New Agnus Message-ID: <6852@cbmvax.UUCP> Date: 12 May 89 14:09:17 GMT References: <1562@hub.ucsb.edu> <114@tardis.Tymnet.COM> <2917@cps3xx.UUCP> <13652@pasteur.Berkeley.EDU> Reply-To: jss@cbmvax.UUCP (John Schilling QA) Organization: Commodore Technology, West Chester, PA Lines: 36 In article <13652@pasteur.Berkeley.EDU> c152-cb@cory.Berkeley.EDU.UUCP (Vince Lee) writes: >In article <2917@cps3xx.UUCP> golden@cps3xx.UUCP (golden james) writes: >>In article <114@tardis.Tymnet.COM> jms@tardis.Tymnet.COM (Joe Smith) writes: >>>In article <1562@hub.ucsb.edu> dougp@sbphy.ucsb.edu writes: >>>> It seems definate that the new chip can handle 1 Meg of chip >>>>ram, but can it handle 2 Megs? (2 Megs is the address space set >>>>asside in the Amigas memory map for chip ram.) >>> >>Does anyone know if the A1000 even has enough lines to support one meg >>of CHIP ram? Is it even possible to do a FATTER AGNES adaptor thing? >>(F.A.A.T. :-) > >I wanna know this too! I have a 1000 and the Chris Erving A/C memory >hack, which places memory at the second 512k just where we want it: >1 meg of contiguous RAM on the Chip bus. > >Keep in mind, though, that I am not squeamish about putting a couple >dozen jumpers on the motherboard and/or adding a piggyback board on the >Agnus socket. > >-Vince The new Agnus will ONLY support 1 meg of CHIP RAM. You can not use it win your Amiga 1000. PERIOD. END OF STORY. NO. ^"in--forget the 'w' John Schilling, QA CBM, Inc. -- ******************************************************************************* * John Schilling Assoc. Engineer, Quality Assurance Technical Support * * uucp: {ihnp4|rutgers|allegra}!cbmvax!jss Commodore Business Machines * *=============================================================================* * "...I just do eyes..." * *******************************************************************************