Path: utzoo!attcan!uunet!cs.utexas.edu!rutgers!att!mcdchg!ddsw1!corpane!sparks
From: sparks@corpane.UUCP (John Sparks)
Newsgroups: comp.sys.amiga
Subject: Amiga Schematics (was Re: Interlace on NEC MultiSync 1)
Summary: Where?
Message-ID: <617@corpane.UUCP>
Date: 11 May 89 12:23:28 GMT
References: <15046@louie.udel.EDU>
Reply-To: sparks@corpane.UUCP (John Sparks)
Organization: Corpane Industries, Inc.
Lines: 20

In article <15046@louie.udel.EDU> Tom Claydon - ASTLC@alaska,
STLC%ALASKA.BITNET@cunyvm.cuny.edu writes:
>
> As a project, and with the Amiga's schematic at my side, I successfully
>rigged up a cable to use the original NEC MultiSync on my A500.
>

Where can I get a copy of the Amiga 2000 schematics? or 500? or 1000?
I have looked around but can't find any. Sams Photofact doesn't carry them, and
my local dealer won't give them out. Any help from net land?

[I am also wondering how hard it would be to build an Amiga 2000 by buying the
motherboard and keyboard and using an AT case and power supply. Not that I am
cheap, but I think it would be a great project.]


-- 
John Sparks   |  {rutgers|uunet}!ukma!corpane!sparks | D.I.S.K. 24hrs 1200bps
[not for RHF] |          sparks@corpane.UUCP         | 502/968-5401 thru -5406 
Anything not worth doing is not worth doing well. -- G. Bell