Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!hermes!dzenc From: dzenc@hermes.ai.mit.edu (Daniel Zenchelsky) Newsgroups: comp.sys.amiga Subject: Re: 4-way player adaptor Keywords: pinouts Message-ID: <3362@hermes.ai.mit.edu> Date: 13 May 89 00:42:19 GMT References: <952@syma.sussex.ac.uk> Reply-To: dzenc@hermes.ai.mit.edu.UUCP (Daniel Zenchelsky) Organization: The MIT AI Lab, Cambridge, MA Lines: 38 In article <952@syma.sussex.ac.uk> nealet@syma.sussex.ac.uk (Neale Type) writes: >Dear All, Does anyone know the pinouts for the 4-way player adaptor for >the serial port, as there about 5(english pounds) to buy, and i bet alot >cheaper to make one yourself... Sure, here you go: Parallel Connector Game connector 1 Game connector 2 ------------------ ---------------- ---------------- Pin 25 (GND) 8 and 8 Pin 2 (UP) 1 Pin 3 (DOWN) 2 Pin 4 (LEFT) 3 Pin 5 (RIGHT) 4 Pin 13 (FIRE) 6 Pin 6 (UP) 1 Pin 7 (DOWN) 2 Pin 8 (LEFT) 3 Pin 9 (RIGHT) 4 Pin 11 (FIRE) 6 ------------------ ---------------- ------------------ WARNING!!: Do NOT connect anything to pin #14 on the parallel connector. Thats the +5 volts from the Amiga, and is one of the few pins that can get you into BIG trouble!! This is for the A500/2000 not the 1000 (I think, I haven't actually built it.) -Dan +-----------------------------------------------------------+ | ______ | | || |o| Daniel Zenchelsky -- dzenc@hermes.ai.mit.edu | | ||___| | | | | _ | "Yes, but every time I try to see things your | | \_[]_|_| way, I get a headache." | | | +-----------------------------------------------------------+