Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!cbmvax!thomas
From: thomas@cbmvax.UUCP (Dave Thomas QA)
Newsgroups: comp.sys.amiga
Subject: Re: NEC MultiSync IIID for Amiga ?
Message-ID: <6912@cbmvax.UUCP>
Date: 18 May 89 12:54:12 GMT
References: <235@syteke.UUCP>
Reply-To: thomas@cbmvax.UUCP (Dave Thomas QA)
Organization: Commodore Technology, West Chester, PA
Lines: 22

In article <235@syteke.UUCP> jim@syteke.UUCP (Jim Sanchez) writes:
> My ancient 1080 monitor died and I want to buy a multisync to replace
> it.  I would have bought the MultiSync II but it has been replaced
> with the IIA which does NOT support 15 KHz sweep rate or so I
> understand.  I would like to know if anyone has used the 3D or if it
> will work(with the appropriate cable of course) at all.  I would not
> like to shell out lots of bucks and be stuck with something that will
> not work.
> -- 
> Jim Sanchez  {sun,hplabs}!sun!sytek!syteke!jim OR
> Hughes LAN Systems, Brussels  mcvax!prlb2!sunbim!syteke!jim


I haven't personally seen the 3D, but a friend just bought one last week. He
says that it works great, plus it understands an interlace signal (something
that many multisyncs don't handle properly).  It syncs from 15-38KHz, so it
should be fine with the ECS (when released) or with a flicker fixer.

            Dave
-- 
Dave Thomas, Commodore Amiga Test Engineering
UUCP  ...{allegra,rutgers}!cbmvax!thomas