Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!apple!well!farren From: farren@well.UUCP (Mike Farren) Newsgroups: comp.sys.amiga.tech Subject: Re: Kermit parameters in VT100 program Message-ID: <11627@well.UUCP> Date: 11 May 89 10:06:48 GMT References: <696@solaria.csun.edu> <790@pccuts.pcc.amdahl.com> <182@tardis.Tymnet.COM> Reply-To: farren@well.UUCP (Mike Farren) Organization: Whole Earth 'Lectronic Link, Sausalito, CA Lines: 17 In article <182@tardis.Tymnet.COM> jms@tardis.Tymnet.COM (Joe Smith) writes: (Discussing VT100 version 2.9) >I have a definite need for SET RECEIVE TIMEOUT 90 (over a slow network). >The other things I haven't been able to find are: > SET BLOCK-CHECK 3, SET FILE WARNING ON >Please add these to some menu. Seems to me that if you wanted all the features of CKermit, what you should get is CKermit, not VT100. All of the "SET" commands you refer to are CKermit commands, and not intrinsic parts of the Kermit protocol (except for SET BLOCK-CHECK 3, and even that is a convenience more than a necessity - do you really have trouble at BLOCK-CHECK 1?). -- Mike Farren uucp: {your favorite backbone site}!hplabs!well!farren Fido: Sci-Fido, Fidonode 125/84, (415)655-0667