Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!pasteur!helios.ee.lbl.gov!nosc!humu!uhccux!cs211s27 From: cs211s27@uhccux.uhcc.hawaii.edu (T.Koseki) Newsgroups: comp.sys.apple Subject: Help with Xmodem on DL 2400! Keywords: Datalink 2400, xmodem, download Message-ID: <3971@uhccux.uhcc.hawaii.edu> Date: 19 May 89 11:11:50 GMT Distribution: usa Organization: University of Hawaii Lines: 24 I'm pretty new at this xmodem stuff, so I need a lot of help trying to download programs from the "comp.binaries.apple2" newsgroup. I've tried downloading with the "xmodem sbc " command and using my Datalink 2400 modem to receive with. The transfer can only be engaged when the communications software disk is in the default drive (usually 1, I've got a Duo-Disk setup). I've tried formatted disks but the transfer always aborts. I've tried using a copy of the communications software disk with all "unnecessary" stuff deleted so the file can fit. The standard com disk is almost full so it usually aborts because of no-space-on-disk warnings. This is really frustrating to deal with. I know I need to download BinSCII, BLU, and ShrinkIt to "decode" the stuff in comp.binaries.apple2. Any suggestions... Please e-mail me directly. Thanx! +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+ | | | | INTERNET: cs211s27@uhccux.uhcc.hawaii.edu | "If you can't crank it, yank | | ARPA: uhccux!cs211s27 | it!" -Car Audiphile | | UUCP: {backbone}!ucsd!nosc!uhccux!ics211s27| | | BITNET: cs211s27@uhccux.bitnet | To be good at 9-ball, one | | CSNET: cs211s27@hawaii.csnet | must have luck; but then again,| | | luck is an art! | +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=+