Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!uwvax!shorty!mark
From: mark@shorty.CS.WISC.EDU (Mark Spankus)
Newsgroups: comp.sys.cbm
Subject: Need Specs for 6582
Message-ID: <7517@spool.cs.wisc.edu>
Date: 14 May 89 04:57:41 GMT
Sender: news@spool.cs.wisc.edu
Reply-To: mark@shorty.WISC.EDU (Mark Spankus)
Distribution: na
Organization: U of Wisconsin CS Dept
Lines: 18


Greets!
	I have the need to replace a SID chip in a C128.  The original chip
is a standard 6581 (12 volts). I have a 6582, but no specs, other than a 
statement saying that it is a 9 volt chip.  Are these two chips identical
except for the voltages?  If so, then it would be no problem to drop the
voltage for the chip & output transistor down a bit. 

 	Any help would be appreciated. Thanks!

	-Mark


 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
 Mark Spankus                       University of Wisconsin - Madison
 path: ...!{allegra,heurikon,ihnp4,seismo,ucbvax,uwm-evax}!uwvax!mark
 arpa:	mark@shorty.cs.wisc.edu
 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-