Path: utzoo!attcan!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!lll-winken!uunet!pdn!tscs!root
From: root@tscs.UUCP (Admin)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Problem with AutoCAD v. 2.17b
Message-ID: <311@tscs.UUCP>
Date: 12 May 89 06:12:34 GMT
References: <2651@cps3xx.UUCP> <3580013@eecs.nwu.edu>
Reply-To: gerard@tscs.UUCP (Stephen M. Gerard)
Organization: Total Support Computer Systems, Tampa, Florida
Lines: 21

In article <3580013@eecs.nwu.edu> huangch@eecs.nwu.edu (Chih-Hao Huang) writes:
>In / usenet@cps3xx.UUCP (Usenet file owner) /  8:36 pm  Apr 20, 1989 /
>>I am having a little problem with ACAD and I hope someone can help me.
>>
>>I should probably say that I am using MS-DOS 4.01.  I don't recall if I
>>used ACAD after I formated my HD for the full 40 MEG or if I only ran it
>>when it was partitioned to 32 MEG.  I don't think this is the problem
>>but I have been wrong before.

Autodesk does not recommend using DOS 4.x.  It yields unusual results as
you have observed.

If you need greater that 32Mbs, use Compaq DOS 3.31.  This DOS version
allows for DOS partitions greater than 32Mb and IS supported by Autodesk!!

-Steve

------------------------------------------------------------------------------
Stephen Gerard  -  Total Support Computer Systems  -  Tampa  -  (813) 876-5990
UUCP: gerard@tscs					   FAX: (813) 871-2783
US-MAIL: Post Office Box 15395 - Tampa, Florida  33684-5395