Xref: utzoo comp.unix.xenix:5979 comp.sys.ibm.pc:28804
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!consult!bob
From: bob@consult.UUCP (Bob Willey)
Newsgroups: comp.unix.xenix,comp.sys.ibm.pc
Subject: Re: PS/2 Multi-port board
Message-ID: <6@consult.UUCP>
Date: 15 May 89 05:06:24 GMT
References: <1192@rel.eds.com>
Reply-To: bob@.UUCP (Bob Willey)
Organization: Computer Csonsulting Service (301) 820-4670
Lines: 28

In article <1192@rel.eds.com> bob@rel.eds.com (Bob Leffler) writes:
>Is there a multi-port serial board  (at least 4 ports)  for a PS/2 Model
>80 that works with SCO Xenix/386?
>
>Also, does the version of SCO Xenix for the PS/2 Model 80 come with the
>ESDI drivers?

Yes, several boards work well with the PS/2.  I have several StarGate
boards here that work just great, 8ports , retails for about $995, 
will let them go for about $450.  Also the Computone boards work
just great Intelliport PS8 (retail $1195).
..
As far as the ESDI drivers, it is fine in the newer versions of SCO Xenix
(current being 2.2.3, as of a few days ago).  The PS/2 version of SCO Xenix
is always a little behind the AT version as it is done in England at
another SCO facility.
..
Hope this helps out a little.
Bob Willey - Computer Consulting Service   (301) 820-4670  Easton, MD
..
..
..
.........................................
..   uunet!consult!bob                 ..
.........................................
..
..
..