Path: utzoo!attcan!uunet!ncrlnk!emdeng!lnewman
From: lnewman@emdeng.Dayton.NCR.COM (Lee.A.Newman)
Newsgroups: comp.sys.m68k
Subject: Re: 68k slave board for IBM PC/AT
Message-ID: <711@emdeng.Dayton.NCR.COM>
Date: 18 May 89 16:49:00 GMT
References: <1997@ubc-cs.UUCP>
Reply-To: lnewman@emdeng.Dayton.NCR.COM (Lee.A.Newman)
Distribution: na
Organization: E&M Dayton, NCR Corporation, Dayton, Ohio
Lines: 24

In article <1997@ubc-cs.UUCP> pdur@tsingtao.cs.ubc.ca (Paul Durham) writes:
>
>Does anybody out there know of a slave board for the IB PC/AT which has:
>68000/68010/68020 CPU
>Z-SCC serial i/o ( or similar )
>DMA controller
>
>for use in synchronous communications ?

The following is from EDN News, 4/20/89, in an article describing the Z-SCC's
successor, which is the USC.

"... Development boards using either the Z280 or 68000 uP allow you to use a
terminal or an IBM PC-compatible computer to exercise the USC.  The boards
come with demonstration software containing applications examples. ...
Samples of the USC are available now for $105 (100).  Development kits
start at $445.
Zilog Inc, 210 Hacienda Ave, Campbell, CA 95008. Phone (408)370-8000."


No mention of DMA, though.

Lee Newman
lnewman@emdeng.dayton.NCR.com