Path: utzoo!attcan!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!husc6!rice!sun-spots-request
From: iotek!mike@uunet.uu.net (Mike Thompson)
Newsgroups: comp.sys.sun
Subject: talking to an ethernet interface on a SUN 3/50 or 3/60 under OS3.5
Keywords: SunOS
Message-ID: <304@jupiter.iotek.UUCP>
Date: 16 May 89 19:24:52 GMT
Sender: usenet@rice.edu
Organization: IOTEK Inc
Lines: 16
Approved: Sun-Spots@rice.edu
Original-Date: 9 May 89 20:07:36 GMT
X-Sun-Spots-Digest: Volume 7, Issue 288, message 10 of 11

I need to be able to send and receive raw ethernet packets on SUNs running
OS3.5. I will be communicating with a custom board running a non-standard
protocol so I need to be able to control the contents of the ethernet
packet.

If anyone out there has done anything similar to this I would appreciate
any pointers or examples (we don't have sun sources).  I've looked at the
networking manuals provided by sun but they don't seem to give all the
necessary details.

					Thanks in advance
-- 
<<<<<<******>>>>>>
Michael A. Thompson, Iotek Inc, |*| E-Mail: mike@iotek.uucp	|*| Have
1127 Barrington St., Suite 100, |*| Fax:    (902)420-0674	|*|   a Good
Halifax, N.S., B3H 2P8, Canada  |*| Phone:  (902)420-1890	|*|     Day :-)