Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: elroy!suned1!efb@ames.arc.nasa.gov (Everett F. Batey II)
Newsgroups: comp.sys.sun
Subject: Second XYLOGICS in 3/160, not recognized
Keywords: Hardware
Message-ID: <1758@suned1.UUCP>
Date: 11 May 89 14:24:39 GMT
Sender: usenet@rice.edu
Organization: NSWSES, Port Hueneme, CA
Lines: 18
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 7, Issue 294, message 16 of 16

Posting this for a non-netnews neighbor.  My neighbor is trying to put two
XYLOGICS 450/451 controllers into one 3/160 ( xyc1, xy2,xy3) and has reset
board side jumpers and dip switches.  Believes he has done all the written
instructions.  No mention of BG / IACK rejumping.  One board seems to
shaddow the other.

... have connected up two disk drives to the main CPU.  Can't get them to
work.  There's an extra board next to the original controller that we
can't identify.  It's in slot 7, where the first controller normally goes
... the first (original) controller is slot 8, and we installed the second
controller in slot 9.  Does that sound right??  Anyway, now the machine
can't find either disk drive.

Any ideas welcomed .. /Ev/

           The_Main_User (So Calif SunLUG | Vta-SB-SLO-DECUS)
      efb@elroy.JPL.Nasa.Gov efb@suned1.UUCP efbatey@Vaxb.Navy.MIL
      Statements, Opinions ... MINE ... NOT those of my US Employer