Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!apple!oliveb!ames!sun-barr!texsun!texbell!killer!igloo!andyross
From: andyross@igloo.Scum.COM (Andrew Rossmann)
Newsgroups: comp.sys.tandy
Subject: Re: Tandy 4000, WINDOWS/386 and DMP2100P
Keywords: Tandy 4000, WINDOWS, DMP2100P
Message-ID: <1431@igloo.Scum.COM>
Date: 17 May 89 01:12:40 GMT
References: <616@pacsbb.UUCP>
Reply-To: andyross@igloo.UUCP (Andrew Rossmann)
Organization: igloo, Northbrook, IL
Lines: 25

In article <616@pacsbb.UUCP> lgarcia@pacsbb.UUCP (Barrio) writes:
!
!I seem to have a serious problem when printing on a DMP2100P using
!WINDOWS/386 on a Tandy 4000. The printer is set to IBM emulation and
!I selected the IBM Graphics printer driver. The output is just an
!endless row of 6s or Qs. Even if I select the Generic/Text only
!printer driver, the result is the same.
!
!Needless to say, I have not experienced anything similar with any 
!other program. The printer worked fine with Windows 1.x using another
!computer.
!
!A call to Microsoft produced no results. A call to Tandy produced
!a promise to call back with an answer, which did not materialize.
!
!Any help will be greatly appreciated.
!
!            Luis M. Garcia-Barrio

  I have the EXACT same problem running Windows 2.03 on my Tandy 1000SX and
a Tandy DMP430 printer. Oddly, it works fine on a Tandy 3000NL w/ DMP440. I
have to experiment switching printers around to see if the problem is in
the printer or the computer.

  andyross@ddsw1.MCS.COM,  killer!igloo!andyross