Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!rutgers!bpa!cbmvax!vu-vlsi!devon!ctdi!mikei
From: mikei@ctdi.UUCP (Mike Israel)
Newsgroups: comp.unix.questions
Subject: Remote Printing using LP
Keywords: Unix,LP,remote
Message-ID: <444@ctdi.UUCP>
Date: 10 May 89 17:24:57 GMT
Organization: Communications Test Design, Inc., West Chester, Pa.
Lines: 16


After reading and rereading the documentation I am at a loss.

I am running Unix SYSV on an AT&T 386 and would like to be able
to print from a remote site.  The idea being that when I call up
system X and request a report, system X should dial me back on another
line and connect to the modem which is hooked up to a printer.  

Entries have been made in Systems at the host sight, and a printer
has been set up according to the Operations/System Admin Guide.  
	(i.e. /usr/lip/lpadmin -p printername -A write -U dialer-entry).

I am able to access this printer through cu, however using
             "lp -d printername"
returns a result of unable to access device.  lpstat reports that the
job is in queue with a printer fault.