Path: utzoo!dptcdc!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!dogie!indri!aplcen!jhunix!ecf_hap
From: ecf_hap@jhunix.HCF.JHU.EDU (Andrew Poling)
Newsgroups: comp.unix.ultrix
Subject: Re: Ultrix 2.2 Unsupported Software Subsets
Summary: look in /usr/etc/subsets
Keywords: Ultrix, setld
Message-ID: <1471@jhunix.HCF.JHU.EDU>
Date: 18 Apr 89 17:49:28 GMT
Expires: 17 May 89 23:00:00 GMT
References: <196@hhb.UUCP>
Reply-To: ecf_hap@jhunix.UUCP (Andrew Poling)
Followup-To: comp.unix.ultrix
Distribution: usa
Organization: The Johns Hopkins University - HCF
Lines: 34

In article <196@hhb.UUCP> leonh@hhb.UUCP (leon howorth) writes:
[...]
>I have had my Ultrix 2.2 magtapes for almost a year now, but just recently
>had a request to extract the Lisp Programs from the second tape in the set, 
>which is the Unsupported software tape. The part number of the tape is 
>BB-JU93B-BE and it is labeled "ULTRIX-32 V2.2 UNSUPP MT9". I have extracted 
>other subsets from this tape (such as news) but when I use the "setld" command 
>for this subset the beginning portion of the tape is read by "setld" after 
>which I receive the message "Unknown Subset". I am using the setld command in
[...]
>The Ultrix 2.2 Advanced Installation Guide (page B-15) lists the subset 
>ULXLISP022 as one that is supposed to be on the tape. I would appreciate
>any assistance on this. Thanks.


If you look in /usr/etc/subsets, you will find the control (cntrl) files and
the index files (ind I think).  Just look to see if there are files there
which have root-names similiar to "ULXLISP022".  

Also useful are the "lock" files (.lk?) which make setld think that that
subset is already loaded.  Very useful when you're trying to load Ultrix3.0
on a VS2000 with (1) RD32 drive and it insists on loading 12,000 blocks of
UWS software.  :-)



Good luck,

Andy

--
andy@gollum.hcf.jhu.edu
ecf_hap@jhunix.UUCP
ECF_HAP@JHUVMS.BITNET