Xref: utzoo comp.dcom.modems:3924 comp.unix.xenix:6175
Path: utzoo!attcan!uunet!consult!bob
From: bob@consult.UUCP (Bob Willey)
Newsgroups: comp.dcom.modems,comp.unix.xenix
Subject: Re: Telebit Trailblazer+ Question
Keywords: Xenix2.2.3 IBM-AT tty1A 19200
Message-ID: <28@consult.UUCP>
Date: 29 May 89 23:15:47 GMT
References: <417@crplabs.UUCP>
Reply-To: bob@consult.UUCP (Bob Willey)
Organization: Computer Consulting Service, Easton MD.
Lines: 21

In article <417@crplabs.UUCP> marcs@crplabs.UUCP (Marc Snyder) writes:
>        I was wondering if anyone out there might be able to give me some
>help.  I purchased a Telebit Trailblazer+ last summer, and installed it on
>/dev/tty1A in place of my Hayes modem.  I was providing support to a system
>SCO 2.2.x about the RTS/CTS flow control.  The 386 system I administer
>has this fix installed, and uucico runs fine at 19,200 baud.  If anyone
>could supply any information that might be of some help, I would be
>very grateful.  Thanks in advance!


There is a patch available from SCO Tech Support  xnx105 which 
addresses RTS/CTS handshaking supplement.  Corrects problems using
RTS/CTS handshaking.  Available on 96tpi,135tpi media.
Submitted on 10/01/88.  
Hope this helps.

-- 
.. Computer Consulting Service     ..      Bob Willey        ..
.. P.O. Drawer 1690                ..    uunet!consult!bob   ..
.. Easton, Maryland  21601         ..    (301) 820-4670      ..
...............................................................