Xref: utzoo comp.lsi:735 comp.lsi.cad:179
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!mit-eddie!bu-cs!buengc!marco
From: marco@buengc.BU.EDU (Marco Zelada)
Newsgroups: comp.lsi,comp.lsi.cad
Subject: Oct Tool Set Question..........
Message-ID: <2966@buengc.BU.EDU>
Date: 28 May 89 18:06:12 GMT
Reply-To: marco@buengc.UUCP (Marco Zelada)
Organization: Boston Univ. Col. of Eng.
Lines: 26


	This is a question for those of you who have used the Oct tool set from
UCB.

	I would like to know if anyone could tell me how to do the following:

	I want to create a schematic view of a circuit entered at the BDSYN
level. I am able to get a physical view for it, and according to the docs, I
should be able to get the schematic view from misII if I load the proper 
library ( read_library ~octtools/lib/technology/scmos/gates/gates.genlib ), 
do the mapping ( map ) and write to the oct DB with the schematic view 
( write_oct cell:schematic ). I tried this but could not get anywhere, because
the gates.genlib is not complete and thus the mapping could not be done.

	Any ideas ?

	Could I get a complete gates.genlib file from somewhere ?

	Thanks in advance for any help.
-- 
______________________________________________________________________________
| Name:	 Marco Zelada                     | Tel: 617 353 9882, Fax: 353 6322 |	
| Group: VLSI CAD Research Laboratory     | E-mail: marco@buengc.bu.edu      |	
| Dept:  Electrical & Computer Engineering| US-Mail: 44 Cummington St.	     |
| Org:   Boston University                |	     Boston MA, 02215	     |
------------------------------------------------------------------------------