Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!munnari!murtoa.cs.mu.oz.au!ditmela!worsley
From: worsley@ditmela.oz (Andrew Worsley)
Newsgroups: comp.os.minix
Subject: Re: Protected mode MINIX for 80286 Info - By Bruce Evans
Keywords: Protected Mode
Message-ID: <5394@ditmela.oz>
Date: 25 May 89 11:37:56 GMT
References: <5262@ditmela.oz>
Organization: CSIRO Division of Information Technology, Australia
Lines: 22

More Info from Bruce....

These installation hints were added as a postscript in my original posting
but didn't get into the repost by Andrew.

1) Rebuild everything except libc.a from scratch.
2) You must use the 1.3 version of make (chmem = 20000). I may have used a
version compiled with a larger line length, but don't think this matters.
3) Leave port_in() and port_out() in libc.a, though I said they no longer
belong there.
4) Run chmem =64000 on asld and perhaps some of the other compliler passes.
If this causes space problems, do the usual juggling. I run a 0K RAM disk
with root on the hard disk to avoid most such problems.
5) Starting from files not matching the 1.3 crc list is only for experts and
adventurers.

Bruce Evans		evans@ditsyda.oz.au
-- 
Division of Information Technology (Melbourne), Phone +61 3 347 8644
C.S.I.R.O.                                      Fax  +61 3 347 8987
55 Barry St.                                    Telex AA 152914
Carlton, Vic, 3053, Australia                   E-mail: worsley@ditmela.oz.au