Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!aramis.rutgers.edu!qbranch.rutgers.edu!rapatel From: rapatel@qbranch.rutgers.edu (Rocky) Newsgroups: comp.protocols.appletalk Subject: Re: CAP/KIP on a FastPath 4 with 4.1 ROMs Keywords: is this doable? Message-ID: Date: 31 May 89 19:36:27 GMT References: <1999@orion.cf.uci.edu> Organization: Rutgers Univ., New Brunswick, N.J. Lines: 16 Yes, people are running KIP on the KFPS-4, and it does work. I am not sure which ROM revisions we are running it on (the KFPS-4s belong to other departments here). Other than the fastpath manager not being able to talk to the kbox, we haven't had any problems. You do need to use the OLD fastpath manager to load it - not the new version that comes with K* and the KFPS-4. I would suggect that you try setting up a KFPS-2/3 if you have access to one and set up the config file and atalkatab correctly so that it works, then simply replace the kbox with the KFPS-4, change the serial number in the config file and bring it up in place of the KFPS-2/3. As long as you can get the KFPS-2/3 configured correctly, you should not have any problems with the KFPS-4. Rakesh Patel.