Path: utzoo!attcan!uunet!van-bc!lpami From: lphillips@lpami.wimsey.bc.ca (Larry Phillips) Newsgroups: comp.sys.amiga Subject: Re: 15 Head Hard drive and the A2090(a) Message-ID: <2426@van-bc.UUCP> Date: 19 May 89 13:45:19 GMT Sender: usenet@van-bc.UUCP Lines: 51 In <1735@dciem.dciem.dnd.ca>, kevin@dciem.dciem.dnd.ca (Wallace B. Wallace) writes: > I recently acquired a 15 head Hard Drive for my Amiga 2000 only to discover > that the A2090(a) does not support >8 heads. Has anyone figured out either > (1) a way around this or (2) a different product that does support it? > Any updates on an upgrade of the A2090(a) that will support them? I'd hate > to lose half of my storage even if I can upgrade it later. > BTW, the drive is a Fujitsu 2249SA, SCSI, 320M, 8 disks, 15 heads Hmm... the 2090(a) does not support > 8 heads _on the ST506 port(s) only_. It definitely _does_ support > 8 heads on the SCSI bus. Here are my mountlist entries for a Fuji 70 meg drive that has been running for about 8 months now. RES2: Device = hddisk.device Unit = 3 Flags = 0 Surfaces = 10 BlocksPerTrack = 17 Reserved = 2 Interleave = 0 LowCyl = 0 ; HighCyl = 1 Buffers = 1 BufMemType = 1 # DHD: Device = hddisk.device Unit = 3 Flags = 0 FileSystem = l:FastFileSystem Surfaces = 11 BlocksPerTrack = 17 Reserved = 2 Interleave = 0 LowCyl = 3 ; HighCyl = 752 DosType = 0x444F5301 GlobVec = 1 Buffers = 20 BufMemType = 1 Mount = 1 # -- - Don't tell me what kind of a day to have! - +----------------------------------------------------------------------+ | // Larry Phillips | | \X/ lphillips@lpami.wimsey.bc.ca or uunet!van-bc!lpami!lphillips | | COMPUSERVE: 76703,4322 | +----------------------------------------------------------------------+