Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!anise.acc.com!ivucsb!dan
From: dan@ivucsb.sba.ca.us (Dan Howell)
Newsgroups: comp.sys.amiga
Subject: Booting from a Supra Hard Drive...
Message-ID: <802@ivucsb.sba.ca.us>
Date: 28 May 89 03:28:10 GMT
Reply-To: dan@ivucsb.sba.ca.us (Dan Howell)
Organization: The Audio Club at UCSB, Isla Vista, California
Lines: 14

I have an A1000 with a Supra SCSI interface and a Seagate 20MB drive.
I would like to know if there is some way to boot from this drive.
I currently have to use a kickstart AND a workbench boot disk which
has the SupraMount in the startup-sequence, which transfers control
to the hard drive.

I wanted to use kickbench, but it has no 1.3 patches.  Do these exist.

Also, is there any reason to have a small OFS partition on this drive, or
should I go ahead and repartition the drive to have nothing but one large
FFS 20MB partition?
-- 
-- Dan Howell  <dan@ivucsb.sba.ca.us>  <ivucsb!dan@anise.acc.com>
-- 55 miles per hour: it's not a good idea, it's just the law.