Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!RICHTER.MIT.EDU!krowitz
From: krowitz@RICHTER.MIT.EDU (David Krowitz)
Newsgroups: comp.sys.apollo
Subject: Re: apollo to laserwriter
Message-ID: <8905231333.AA02241@richter.mit.edu>
Date: 23 May 89 13:33:49 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 11

Dave,

Interestingly enough, You can run your SR9.7 print servers under
SR10 as is. You just have to set the the /sys/print directory
and the links to it like you normally do under Sr9 and use
the "-pre10" option when using /com/prf on SR10 machines. When
you give the command "prf -pre10" on an SR10 machine, it bypasses
the print manager and creates an SR9 style print queue entry
which your current print servers are looking for.

== Dave Krowitz