Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wasatch!cs.utexas.edu!uunet!portal!cup.portal.com!Harry_Wallace_Waddell
From: Harry_Wallace_Waddell@cup.portal.com
Newsgroups: comp.sys.atari.st
Subject: Re: zmodem and uniterm
Message-ID: <18732@cup.portal.com>
Date: 24 May 89 05:19:13 GMT
References: <8905212049.AA09423@cunixa.cc.columbia.edu>
Distribution: usa
Organization: The Portal System (TM)
Lines: 21


>Hello out there!  Anyone ever try using sz and rz with UniTerm?  I tried last
>night and I kept getting TOS error #39.  What does that mean?  Does anyone 
>know of a zmodem desk.acc that you can call up from any GEM program?  I saw one
>that supported SEAlink, but zmodem would be so much nicer.  Also, I just moved
>back into my parent's home for a few months and they have call waiting.  Well,
>I guess I don't have to tell you what a miserable effect it's having on my
>datacommunicatns.  Does anyone know how to turn call waiting off and on?
>Thanks.

To use the RZ.PRG with uniterm, you need to confiqure the buffers
so that sufficient system memory remains, i.e. I downloaded the above
using uniterm, RZ.PRG, and 500k of system memory left free by uniterm.
This should work for uniterm 2.0c or later.

As far as call waiting goes, try dialing 1170 as a prefix to 
the number you are calling. If you hear three tones before the rest of the 
number is dialed, then call waiting is dissabled. Once again it works for me.

					Harry Waddell
					harry_wallace_waddell@cup.portal.COM