Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!ukma!tut.cis.ohio-state.edu!ucbvax!hplabs!hpfcdc!rjn
From: rjn@hpfcdc.HP.COM (Bob Niland)
Newsgroups: comp.sys.hp
Subject: Re: Getting HP 9000/825 with Mux 98196A to work with TB+
Message-ID: <5570187@hpfcdc.HP.COM>
Date: 19 May 89 12:57:00 GMT
References: <857@ecf.toronto.edu>
Organization: HP Ft. Collins, Co.
Lines: 6

re: "...also tried the cable as suggested in the HP Multiplexer manual."

Try using an HP 92219Q cable.  This cable is the only pre-fab cable I know
of that converts the default DCE pinouts of the MUX to DTE for modem use.

Bob Niland  ARPA:rjn%hpfcrjn@hplabs.HP.COM   UUCP:[hpfcse|hplabs]!hpfcla!rjn