Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!sdcsvax!ucsdhub!hp-sdd!hplabs!hpfcdc!hpfcmgw!hpfcse!hpulaxa!geff
From: geff@hpulaxa.HP.COM (Geff Blaha)
Newsgroups: comp.sys.hp
Subject: Re: Getting HP 9000/825 with Mux 98196A to work with TB+
Message-ID: <110001@hpulaxa.HP.COM>
Date: 19 May 89 23:54:09 GMT
References: <857@ecf.toronto.edu>
Organization: HP LA Sales Office
Lines: 20


re:     Has Anyone have been able to get a Telebit Plus to work on a 
        HP 9000/825 with Mux 98196A ?

      The cable that I have used from the Multiplexer to the modem has the
following pin outs.

    Is the multiplexer a DTE or DCE ?  From the wiring, I would assume it
is a DCE, am I right ??

     Any help would be much appreciated.


     Boon
----------

You might try a cable that is end-end, i.e., 2-2, 3-3, 7-7, etc. The 98196
mux panel (to the best of my knowledge) is DTE and you only reverse 2 & 3
when hooking a modem or DCE devices to it (like some printers). Otherwise,
try a standard straight through cable. It works with HP terminals.