Xref: utzoo comp.windows.ms:572 comp.sys.hp:2080
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!ucsbcsl!lemon!harald
From: harald@lemon.ucsb.edu (Ommang, Harald)
Newsgroups: comp.windows.ms,comp.sys.hp
Subject: Re: HP Paintjet, Bitstream Fontware, & MS Windows
Message-ID: <1809@hub.ucsb.edu>
Date: 22 May 89 05:10:26 GMT
References: <641@cbnewsl.ATT.COM>
Sender: news@hub.ucsb.edu
Reply-To: harald@lemon.UUCP (Ommang)
Distribution: usa
Organization: University of California, Santa Barbara
Lines: 33

In article <641@cbnewsl.ATT.COM> dkk@cbnewsl.ATT.COM (david.k.kallman) writes:
>
>There was a nice review of Bitstream Fontware in PC
>magazine this week.  Is it possible to use Bitstream
>Fontware with Microsoft Windows to generate soft fonts for
>use with the HP Paintjet?
>

I have FONTWARE release 2.03 that I use with my LASERJET II.
Here is the list of printers supported in this version :
C-Itoch 8510
Epson LQ series
Epson MX, RX, LX, FX, EX, JX series
HP Laserjet Plus or compat.
HP Laserjet II or compat.
HP Thinkjet (2225 C-D)
IBM Graphics or Proprinter
NEC P2 or P3
Okidata 92, 93, 192, 193
Star SG-10
Texas Instruments 850 or 855
Toshiba P1351
White-writer HP Laserjet Plus compat
White-write HP Laserjet II or Compat

Harald



==================================================================
"Born in the ice-blue waters of the festooned Norwegian coast.."
         - Bertrand Meyer on object-oriented programming
Well, so was Harald Ommang.    harald%cornu@hub.ucsb.edu