Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!ames!elroy!usc!orion.cf.uci.edu!uci-ics!bvickers
From: bvickers@ics.uci.edu (Brett J. Vickers)
Newsgroups: comp.sys.ibm.pc
Subject: Re: PROCOMM PLUS question
Message-ID: <15584@paris.ics.uci.edu>
Date: 24 May 89 05:08:21 GMT
References: <24032@shemp.CS.UCLA.EDU> <20@consult.UUCP>
Sender: news@paris.ics.uci.edu
Reply-To: Brett J. Vickers <bvickers@ics.uci.edu>
Organization: University of California, Irvine - Dept of ICS
Lines: 22

In article <20@consult.UUCP> uunet!consult!bob (Bob Willey) writes:
 >In article <24032@shemp.CS.UCLA.EDU> cc1@cs.ucla.edu (Max Kislik) writes:
 >>Does anyone know how to make Procomm Plus recongnize the busy signal 
 >>of the phone line like procomm 2.4.2 used to be able to do?
 >>
 >>I am using PCplustd.
 >
 >
 >The easiest solution would be to upgrade to the commercial version
 >of ProComm + which is now up to V1.1B and will recognize busy signal
 >just fine.  There is also a new version of the old procom (2.4.3) out.
 >Hope this helps.

This isn't necessarily true.   I think the problem is that Bob hasn't
got a "v1" in his modem initialization string.  Stick the V1 in and the
modem will send the verbose Modem Strings which Procomm recognizes.

--
 Brett J. Vickers
 ----------------
 "Eritis sicut Deus, scientes  *  bvickers@bonnie.ics.uci.edu
  bonum et malum"              *  ---------------------------