Xref: utzoo comp.sys.ibm.pc:29413 comp.binaries.ibm.pc.d:3211
Path: utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!att!cbnewsc!psfales
From: psfales@cbnewsc.ATT.COM (Peter Fales)
Newsgroups: comp.sys.ibm.pc,comp.binaries.ibm.pc.d
Subject: Re: Lapine hard drive
Keywords: lapine hard drive duh whatisthis
Message-ID: <1032@cbnewsc.ATT.COM>
Date: 27 May 89 02:33:55 GMT
References: <565@dekalb.UUCP>
Organization: AT&T Bell Laboratories
Lines: 26

In article <565@dekalb.UUCP>, greg@dekalb.UUCP (Greg Philmon) writes:
> 
> I just received a Lapine hard disk drive as part of a trade.  The guy was using
> it as a 30 MB RLL drive w/ a WD 8-bit controller and had no errors.
> 
> Anyway, the model number seems to be "TITAN 3532" and it is a 3.5" hard drive.
> Anything you can tell me about it would be appreciated, including access time,
> rated capacity, heads, cylinders, etc...

According to the LaPine data sheet, September 13, 1985, the 3532
is a 20 MB MFM drive.  

Formatted Capacity: 20.05 megabytes
Heads:	4
Cyls:	612+4 spares (then it says spares are 613, 614, and 615.  Really.)
Track-to-track: 26 ms
Average Access: 82 ms
Maximum: 154 ms
Power: 5VDC @ 0.65 A max
	12VDC @ 0.85 A running, 1.9 A max during startup
	
-- 
Peter Fales			AT&T, Room 5B-420
				2000 N. Naperville Rd.
UUCP:	...att!ihlpb!psfales	Naperville, IL 60566
Domain: psfales@ihlpb.att.com	work:	(312) 979-8031