Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!portal!cup.portal.com!ts
From: ts@cup.portal.com (Tim W Smith)
Newsgroups: comp.sys.mac.programmer
Subject: Re: Interrupt Handler Question
Message-ID: <18787@cup.portal.com>
Date: 25 May 89 09:53:11 GMT
References: <13509@dartvax.Dartmouth.EDU>
Distribution: na
Organization: The Portal System (TM)
Lines: 7

The mask will have already been set to the appropriate value.
Unless your hardware is strange ( like, for instance, it is
sharing an interrupt level with other hardware, and that other
hardware does not expect interrupts to be shared ), you should
never have to touch the mask.

					Tim Smith